<li id="na4gm"><acronym id="na4gm"></acronym></li>

  • <button id="na4gm"><acronym id="na4gm"></acronym></button>
    <dd id="na4gm"><pre id="na4gm"></pre></dd>
  • <rp id="na4gm"><strike id="na4gm"></strike></rp>
    <progress id="na4gm"><track id="na4gm"></track></progress>

      <th id="na4gm"><track id="na4gm"></track></th>

      中文版|ENGLISH|聯系祥源|江陰市祥源機械有限公司——滑板

      歡迎來到江陰市祥源機械有限公司官方網站!
      13775092817

      咨詢熱線:0510-86150331
      售后熱線:0510-86150331

      專業從事冶金成套設備、金屬板帶深加工成套設備金屬表面處理成套設備
      友情鏈接:江陰市祥源機械有限公司——滑板

      聯系祥源
      服務熱線:13775092817

      咨詢熱線:0510-86150331

      公司地址:江蘇省無錫市江陰市夏港鎮西城98號

      當前位置:首頁 » 祥源產品中心

      彩涂機組

      產品介紹:

      彩涂機組是以熱鍍鋅板、熱鍍鋁鋅板、電鍍鋅板等為基板,經表面預處理(化學脫脂及化學轉化處理)之后,在表面涂敷一層或幾層有機涂料,隨后經過烘烤固化的產線。

      生產工藝采用二涂二烘,三涂三烘的工藝,正、反面單層油漆膜厚可調,烘烤爐形式為懸垂式熱風循環型,廢氣處理采用高溫焚燒工藝。

      彩涂成品表面狀態可以分成正常涂層卷、壓花卷、印花卷等。

      市場用途主要分為建筑、家電和鋼窗、家具等。

      訂購熱線:0510-86150331

      產品介紹

      技術規范:

      Raw Material

      Thickness

      Width

      Speed

      Coating Thickness

      Energy

      CR/GI/GL/AL

      0.13-1.5mm

      500-1800mm

      30-120m/min

      8-25 μm

      Gas/LPG/steam/ electricity

       

      Primer coating:         epoxy resin, polyester, polyurethane  

      Finish coating:         polyester, fluorocarbon, silicone polyesters,polyurethane

        

      Characteristic:

      a.       The whole line process layout is compact

      b.      Tension of all process zone design reasonable, guarantee coating thickness precision control △≤5, improve qualified product percentage

      c.       Finish coater select two head design type, this design is advanced and change color quickly during the running, simple operation, meanwhile save foundation cost

      d.      Set stitching seam automatic tracking, protect the coating roll from damage

      e.       Low consumption GAS consumption is lower than 8 m3/ton (calculated according to 0.34X1220mm, speed 120m/min, 2C2B,total dry film thickness 23-28um)

      f.       Environment friendly

      g.      Waste-heat recovery and utilization

      h.      Exhaust gas equip with LEL detection system, to ensure safety production

      i.        Equip with online Knurling device and cold/hot laminator if you require, color precision ≤0.5mm


      CCL   GUANGDONG FOSHAN

      0.18-0.8mm   600-1250mm   120,000T/year

      CCL   GUANGDONG FOSHAN

      0.18-0.8mm   600-1250mm   120,000T/year

       

      CCL      SHANDONG LONGFA

      0.15-1.0mm   800-1250mm  capacity 100,000T/year

       

      CCL WITH PRINTING    SHANDONG LONGFA

      0.3-1.2mm   900-1280mm   Capacity:70,000T/year

       

      亚洲无码天堂

      <li id="na4gm"><acronym id="na4gm"></acronym></li>

    1. <button id="na4gm"><acronym id="na4gm"></acronym></button>
      <dd id="na4gm"><pre id="na4gm"></pre></dd>
    2. <rp id="na4gm"><strike id="na4gm"></strike></rp>
      <progress id="na4gm"><track id="na4gm"></track></progress>

        <th id="na4gm"><track id="na4gm"></track></th>